Difference between revisions of "Install Uboot"
From Klaus' wiki
Line 2: | Line 2: | ||
<source lang="bash"> | <source lang="bash"> | ||
+ | $ cd /home/emb | ||
$ tar xjvf u-boot-1.1.6.tar.bz2 | $ tar xjvf u-boot-1.1.6.tar.bz2 | ||
$ cd u-boot-1.1.6 | $ cd u-boot-1.1.6 |
Revision as of 09:59, 8 October 2012
Follow this guide to install u-boot for your embedded device.
$ cd /home/emb $ tar xjvf u-boot-1.1.6.tar.bz2 $ cd u-boot-1.1.6 $ # May not be necessary: gunzip -c ../u-boot-1.1.6-ea_v1_9_0.diff.gz |patch -p1 $ gunzip –c ../u-boot-1.1.6-ea_v1_9_1.diff.gz| patch –p1 $ gunzip -c ../u-boot-1.1.6-ea_v1_9_1_incr1.diff.gz | patch -p1 $ gunzip -c ../u-boot-1.1.6-ea_v1_9_1_incr2.diff.gz | patch -p1 $ make LPC2478OEM_Board_32bit_config # or make LPC2478OEM_Board_16bit_config if that's the one you've got. # or make LPC2478OEM_Board_16bit_48MHz_config if you're using sd-ram (or if linux is unstable and hard to boot). $ make $ /home/emb/uClinux-dist/usr/local/bin/arm-linux-objcopy -I binary -O ihex u-boot.bin u-boot.hex
If you were in the middle of compiling your kernel return to the kernel configuration. Build uClinux for EA2478 Board